Ringanka
Class A1 Anchor Devices to EN 795, BS7883:2005 and ISO 14567
A comprehensive range of anchor bolts and accessories to suit most installations.
Fall Protection Anchorages Are Intended To Save Life!
Their positioning should always be determined by a competent person, following the recommendations of BS 7883:1997 clause 8 where appropriate. Installation should also follow Appendix A of EN 795 and also BS7883:2005, and must always include testing procedures detailed in the appropriate clauses of those standards. NEVER use eyebolts other than EN 795 as Fall Protection Anchor Devices - the wrong eyebolts in the wrong situation could prove FATAL!
Standard 100mm Eyebolt
For use with knurled insert in brick, concrete and masonry etc. as per figures 7 and 8 of BS7883:2005
For use with knurled insert in brick, concrete and masonry etc. as per figures 7 and 8 of BS7883:2005
Longer 152mm Eyebolt
Available where deeper fixing is necessary
75mm Shank Length
For use ONLY on steel structures.See BS7883:2005 Fig. 9
For use ONLY on steel structures.See BS7883:2005 Fig. 9
Our safety eyebolts for use in brick, concrete and masonry have a 16mm diameter unthreaded shank to ‘plug’ a drilled hole, thus reducing the bending effects which would result in earlier failure during shear loading. These safety eyebolts can be used by fixing to an outside or inside face of a structural element adjacent to the window or other access. They are manufactured
from either high tensile carbon steel with a galvanised or plastic-coated finish, or grade 316 stainless steel bright polished.
