210 GUIDED TYPE FALL ARREST SYSTEM FOR . . . . . . . . .
Uniline Safety Systems Ltd manufacture engineered safety systems for use by personnel involved in procedures whilst working at heights.
Uniline Fall Protection Systems – to EN795 class A, C & D
Uniline’s fall protection systems allow users to access areas that would other wise be considered dangerous. Systems include the Award Winning Uniline Synthetic Cable System, Uni-8 Stainless Steel Cable System and Uniline Roofsafe™ and UniRail™ Aluminium Rail Systems and EasyClimber Vertical Fall Protection System. All systems offer the capability of hands free use and complete freedom of movement through ingenious and patented travelling attachment devices. The user or users are able to access all areas of the system without the need to detach at any time. All Uniline System designs are simulated using Uniline for Windows™ Software to ensure they are safe for use within the parameters of the buildings design.
Uniline Force Management Systems for Single Ply Membrane Roofing – EN795 class A & C
A patented roof anchor enables the Uniline or Uni-8 systems to be installed directly on to the top of a PVC roof membrane, without limitation to position and freedom of travel. Anchors can be fitted to roofs with substrates made of metal deck, plywood or concrete. The Force Management System is housed in an aesthetically pleasing, low profile roof post and in the event of a fall on the system the integral energy absorber allows the anchor to re-orientate and reduce the load on the roof system to an acceptable level, protecting its integrity. The roof anchors, which support the fall protection system, are attached through the roof membrane, insulation and substrate using a toggle clamp and spacer, which prevents compression of the insulation when the anchor is under load and reduces thermal bridging. The post is made fully watertight when an approved roofing contractor carries out sealing of the base plate after installation. The fastening system enables the Force Management System to be located anywhere on the roof, with great speed and no disruption. The anchors are made using a 304 stainless steel plastisol coated base plate and 316 marine grade stainless steel components and casing and have a 25-year performance and corrosion resistance guarantee.
The anchor posts can be installed up to 12 metres apart with Uni-8 and 16m apart with Uniline. Calculations to ensure the correct design performance are provided by Uniline. Typically, distributed load per square metre to the roof system is between 0.53kN and 2.52kN where insulation is up to 150mm in depth. End anchors, corner anchors and intermediate anchors permit flexibility in system design. Uniline can provide design and specification assistance (mailto:design@uniline.com) and early consultation is recommended in order to validate roof system capability.
Manufacturer: Uniline Safety Systems Ltd, 3 Sherwood Road, Aston Fields Industrial Estate, Bromsgrove, Worcestershire, B60 3DU. Tel: 01527 577665 Fax: 01527 577233 Email: Uniline@unilinesafety.com Web: http://www.nbsplus.co.uk/process.asp?Uniline
System reference: Force Management Anchor for PVC Membrane Roof Systems
Anchorage device: Force Management Anchor
Intermediate support spacing: Anchors may be located up to 12m centres when used in conjunction with Uni-8 and 16m with Uniline– consult with Uniline for details and recommendations.
Accessories/ Other requirements:
304 Stainless Steel PVC Coated base Plate
Approved Watertight Detailing
End Anchors
Corner Anchors
Intermediate Anchors
Variable Intermediate Anchors
Anti-Compression Toggle Clamps
25 Year Guarantee
Certificate of Conformity to PPE Directive
Uniline for Windows Calculation of System Performance
Uniline Full Body Harness and Appropriate PPE
